Message Board Thread - "SDK GetImage frame size"

Back to Threads | Back to Forums

TitleByPosted On
SDK GetImage frame size Clint 12/2/2010
Hi,

In C# code, I read absolute temperature data from an ethernet-connected A320 camera using the FLIR SDK's GetImage method.

It seems as though this always returns 320x240 (as does MLGetImages, regardless of the frame size options I pass), although when I view the camera video in a FLIR tool, I am able to view it in 640x480.

Is there a parameter I can send to the camera so that GetImage returns 640x480 frames? The camera properties that look useful (66 and 67) are both read-only.

Thanks!
 
Re:SDK GetImage frame size jgagnon 12/2/2010
Clint wrote:
In C# code, I read absolute temperature data from an ethernet-connected A320 camera using the FLIR SDK's GetImage method.

It seems as though this always returns 320x240 (as does MLGetImages, regardless of the frame size options I pass), although when I view the camera video in a FLIR tool, I am able to view it in 640x480.

Is there a parameter I can send to the camera so that GetImage returns 640x480 frames? The camera properties that look useful (66 and 67) are both read-only.

Thanks!
Hello,

Please post this question to our FLIR Support Center website: http://support.flir.com . This will allow us to assign the case to a product specialist who can assist you.

Best Regards,

Jason Gagnon
FLIR Systems, Inc.
E-mail: jason.gagnon@flir.com
Support: http://support.flir.com
 


  • Back to Threads
  • Back to Forums

     

  •   Copyright © FLIR Systems, Inc 2012