Message Board Thread - "Camera not working..."

Back to Threads | Back to Forums

TitleByPosted On
Camera not working... Joe_Lutz 6/6/2005
My company just recently picked up a ThermalScan IRC-3000. Somebody got there hands on it and now it wont turn on. I've tried using the power supply and battery and a couple other little things but nothing has worked. This is a pretty expensive camera and we want to try to make sure it's not something silly or a common fixable problem before we send it to the factory. Any tips? Thanks a lot!
 
Re:Camera not working... Joe_Lutz 6/6/2005
Also... The camera is less than one month old. As far as I know, it hasn't been dropped either. It doesn't look like there are any signs of abuse on the outside of the camera.
 
Re:Camera not working... dprice 6/6/2005
Purchase a FLIR B Series Camera. FLIR will give you trade-in on ISI camera.
 
Re:Camera not working... Joe_Lutz 6/6/2005
Eh?
 
Re:Camera not working... Joe_Lutz 6/6/2005
Any other tips?
 
Re:Camera not working... Jim Haney 6/13/2005
It sounds like you should contact the manufacturer Service department directly. I believe that camera is made by Infrared Solutions: http://www.infraredsolutions.com/support/faq/flexcamfaqF.shtml

Although a B2 is a nice camera, the FLIR B2 only has a 160 X 120 Detector, so I don't think you will want to downgrade from your 320 X 240 Detector. Flir does make some very nice cameras with 320 x 240 detectors and a trade in program.


Regards,

Jim Haney
Technical Support
FLIR Systems, Inc.
Office: 978-901-8232
Fax: 978-901-8832
FLIR Corporate: 978-901-8000
ITC Corporate: 978-901-8405
mailto:jim.haney@flir.com
http://www.infraredtraining.com
http://www.flir.com

 


  • Back to Threads
  • Back to Forums

     

  •   Copyright © FLIR Systems, Inc 2012