Message Board Thread - "Standard of Classification"

Title	By	Posted On
Standard of Classification	Howie	8/30/2005
Can anyone please point me in the right direction to get an industry standard for classifying electrical anomalies?
Quote Message and Reply
Re:Standard of Classification	Tony Holliday (HAWK IR)	8/31/2005
Hi there, If you are interested in classifying potential failures by temperature, you could check out NETA and/or NFPA70B. I would use these as a guide rather than a "set-in-stone" rule however and do not forget than when looking at delta-T measurements for comparison, wherever possible take load readings, but please do it safely. Good luck, Tony Holliday Hawk IR International Ltd. Web. http://www.hawk-ir.com/ Toll Free. 1-877-4-HAWKIR
Quote Message and Reply