Message Board Thread - "British Institute of Non-Destructive Testing Certification for Thermography and ISO 18436"

Back to Threads | Back to Forums

TitleByPosted On
British Institute of Non-Destructive Testing Certification for Thermography and ISO 18436 John C. Lafeber, P.E. 1/2/2006
I''d apprecite comment on the BINDT Certifiaction for Thermography and also ISO 18436

British Institute of Non-Destructive Testing Certification http://www.bindt.org/Mk1Site/PSL8ACM.html


CM_GEN Issue 1 Rev C - General requirements for qualification and certification of Condition Monitoring and diagnostic personnel

CM-GEN APPENDIX B Issue 1 Rev C - Specific requirements for qualification and certification of Condition Monitoring and diagnostic personnel for Infrared Thermography

Article - Condition monitoring with thermography: training, certification and accreditation – Colin Pearson - Insight Vol 46 No 3 March 2004 (PDF file 716k) - http://www.ukta.org/certification.htm
“Only the initial parts of ISO 18436 had been published …. However, PCN has published method documents for vibration, acoustic emission, oil analysis and thermography(3) and these are available from PCN and are being used as draft documents for ISO18436.”

Flir

The training offered by Flir meets ISO 18436 for the monitoring of the condition of equipment.
http://www.imagesurveys.com/
 
Re:British Institute of Non-Destructive Testing Certification for Thermography and ISO 18436 Lisa West 1/3/2006
Greetings and Happy New Year Mr. Lafeber,

I work with BINDT and other national agencies on the ISO working groups that draft standards within condition monitoring. I also represent the country of Sweden in voting on ISO standards within ISO TC 108 SC5. I started ITC in Europe and Asia in 1999 and have responsibilty for all of our businesses outside of the Americas.

I just returned from a ISO working group meeting held in Florida, with colleagues from ITC Americas, ITC France, and many other representatives around the world, including BINDT, where we worked on components of ISO 18436. In the UK, ITC is an ATO (authorized training organization) for BINDT.

If you would be more specific about your inquiry, I would be happy to reply to you. Feel free to email me directly at "lisa.west@flir.se"

 
Re:British Institute of Non-Destructive Testing Certification for Thermography and ISO 18436 ogi 1/26/2006
How can level 1 thermographer be iso certified
for doing thermography inspections?
 


  • Back to Threads
  • Back to Forums

     

  •   Copyright © FLIR Systems, Inc 2012