| Title | By | Posted On |
| * sign before temperature on B2 |
Videe |
12/13/2007 |
What is the meaning of the * sign before a temp on the B2 camera? (there was a + sign also) It showed up at 134f but did not show up at 141f which was clearly over scale.
Thanks
|
| Quote Message and Reply |
| |
| Re:* sign before temperature on B2 |
Jim Haney |
12/13/2007 |
| When there is an asterisk beside the number, the camera is extrapolating the value slightly outside the calibrated limit. If you have a, less than (<), or grater than (>) symbol next to the number, it means the camera cannot resolve the value outside the calibrated limit and is either to far below (< limit), or too far above (> limit) the calibrated limit. |
| Quote Message and Reply |
| |
| Re:* sign before temperature on B2 |
Videe |
12/13/2007 |
| Good answer, thanks Jim and Happy Holidays to all the folks at FLIR |
| Quote Message and Reply |
| |
