Click on any title or image to view larger full size images along with supplementary thermal and associated visible images.
 |
Alloy Wheel Mold
Casting image of an alloy wheel mold. Thermography is often used for mold profiling.
|
 |
Plastic Extrusion
This is plastic extrusion. You can see the non-uniformity in the extruded product easily. Infrared allows the operator to make adjustments to the process to improve quality.
|
 |
Heated Car Seats
Inspecting heated car seats.
|
 |
Heat Seal
In food packaging, many of the containers go through a “heat sealing” process. In the case of the milk cartons in this image, we can easily see that there are two containers that didn’t get sealed.
|
 |
Micro resistor
Micro resistor with faulty element.
|
 |
Wafer Board
This is an annealing process for wafers. Thermography can quickly identify thermal irregularities on critical parts.
|
 |
PC Board
PC board with overheating component.
|
 |
Microcircuit
ThermaCAM image of a microcircuit showing 7 micron leads. Faults even smaller than 7 microns can be detected. ThermaCAM systems can measure very small targets. Even if you knew where a hot spot was on something this small, you couldn’t measure it with a thermocouple, since the heat would sink away.
|
 |
Jet Engine
Jet engine testing
|
 |
Computer Chip
This is a computer chip under test. ThermaCAM imaging radiometers provide instant identification of a fault.
|
 |
PC Board Hot Spot
Obvious hot spot on a PC board.
|
 |
Glass at 5.1 microns
Looking at glass surface temperature with a glass filter at 5.1 microns.
|
 |
Glass
Looking through glass at 3.4 microns.
|
 |
Epoxy
Infrared cameras can measure through many materials. This is a measurement through glass of an epoxy material used as a bonding agent.
|
 |
Crystal Growth
Measuring crystal growth at 1300C through and IR transparent window.
|
 |
Mold temperature
Mold temperature in an automotive seat.
|
 |
Frozen Chicken
Frozen chicken temperatures in freezer unit.
|
