Message Board Thread - "Standard of Classification"

Back to Threads | Back to Forums

TitleByPosted On
Standard of Classification Howie 8/30/2005
Can anyone please point me in the right direction to get an industry standard for classifying electrical anomalies?
Re:Standard of Classification Tony Holliday (HAWK IR) 8/31/2005
Hi there,

If you are interested in classifying potential failures by temperature, you could check out NETA and/or NFPA70B.

I would use these as a guide rather than a "set-in-stone" rule however and do not forget than when looking at delta-T measurements for comparison, wherever possible take load readings, but please do it safely.

Good luck,

Tony Holliday
Hawk IR International Ltd.
Toll Free. 1-877-4-HAWKIR

  • Back to Threads
  • Back to Forums


  •   Copyright © FLIR Systems, Inc 2012