| Title | By | Posted On |
| Some opinions on contactors please |
jayb |
3/26/2009 |
I have attached an image of a fan colis contactor that I have recently taken, as you can see some areas are reaching a tmep of over 65.c. I have apoken to the Manufacturer (Lovata) and they ahve said that a temp of upto 70 is fine. What would you advise that I do?
Many thanks
Jay |
 |
|
| |
| Re:Some opinions on contactors please |
TJF |
4/6/2009 |
I recommend checking current load, ambient temperature also if possible visually check contact surface (if possible). I would say from past experience that what you are seeing is hotter than what it shows. Focus is an important part of determining heating and as I observe your IR picture it seems a little out of focus
TJF |
|
| |
| Re:Some opinions on contactors please |
jayb |
4/7/2009 |
TJF wrote:
mend checking current load, ambient temperature also if possible visually check contact surface (if possible). I would say from past experience that what you are seeing is hotter than what it shows. Focus is an important part of determining heating and as I observe your IR picture it seems a little out of focus
TJF many thanks |
|
| |
